What to do if there is a problem with hot dip galvanizing?
2023-05-08 14:27:00.194
Release time:
2023-05-08
First of all, a good hot-dip galvanized processing plant must have a considerable scale. Because the hot dip galvanized processing plant needs many production lines, so if the company is small and the equipment is not complete, it can not make professional products. Secondly, it is the requirement of galvanized layer. If the product after hot dip galvanizing can be stored in the air for a long time, this is a high specification. If it is oxidized or the galvanized layer falls off after less than a year and a half, it is the problem of galvanized.
In general, some problems will inevitably occur when hot dip galvanizing, for example, zinc leakage is often in the processing process. So how does Baoding hot dip galvanizing avoid this kind of thing?
1. Avoid iron pickling of high carbon steel
2. Keep the clean surface of the workpiece inlet hot dip galvanized zinc solution concentrated, and prevent aluminum content.
3. Strengthen the hot dip galvanizing treatment in the early stage
4. Minimize processing time
9. Ensure the quality concentration and reasonable matching of electroplating assistance
10. Flame cutting, grinding galvanized surface to remove residual scrub.
Related News
Related News
undefined
Address: No. 658, Zhenxing Road, Haiyan County, Jiaxing City, Zhejiang Province
Scan Mobile Edition
Copyright: Jiaxing Baoli Machinery Co., Ltd